Advertising On Sun Board In Munirka Opposite Vasant Vihar Bus Depot Near Vasant Kunj Delhi India

Advertising On Sun Board,

• The Print Process
• Reliability.

It is made of in 3 layers as both side paper with white clay coated and inside propylene with plain surface easy to paste print smoothly. Now day technologies are going to update day by day even stuff is plain or textured not matter because ink apply in the form of a spray no problem of Damage of Printing Machine Head.

There are several methods of making advertising as “Direct UV Printing On Sun Board” and “Print Vinyl & Paste on to Sun Board”, Solvent Ink Printer and Eco-Solvent Ink Printer on Vinyl.

For branding inside as per in Corporate and SME offices done in the view of company logo and brands color maintain registered color pattern to keep in mind first of all design is formatted either CYMK Format or JPEG as per color combination guidelines, The origin color of the material is white, available in the market thickness and size range from 2 mm thickness to 10 mm and single pcs size 6’x4′, 8’x4′, 6’x12′ standard sizes. it is printed in the following option.

1. Flat Bed Printer

2. Roll Form Printer

Flat Bed Printer: In this process entire sun board sheet is fixed in the flatbed machine frame tightly with clamp and through the computer attached flatbed printer, design printing application is applied to the printer, through moving printing head printed by UV ink that is permanent ink not soluable in the water, so water pollution canot be possible, no required to laminated for colour safety but if you require to look glossy or matt finish look you can laminate. maximum size can be print in single piece 8fit x 8fit. The per square ft cost higher than solvent print and eco-solvent. and can get in hand printed it in short turnaround. This is completely fade proof and long lasting age.

Roll Form Printer: I). Solvent Print; First of all artwork made ready to print on adhesives vinyl and get laminated for the safety of color and environment because of ink used it is soluble in water. thereafter printed vinyl pasted on it to get ready for advertisement on sun board, Maximum size can be print 10ft.x any fit. size this process is longer than flatbed UV Printing.

Roll Form Printer: II). Eco Solvent Print; In this roll form printer, ink and printer changed, Eco-solvent printer and ink changed to an eco-solvent ink and max printable size 5ft.x any ft. length, advertising on sun board get to print in adhesives vinyl then paste on it and don’t require to laminate because of ink used it is not soluble in water. thereafter printed vinyl pasted. so it is ready to advertise if the required size is bigger than print size can be paste in a part.

Overall branding for indoor is suggested best but if you are using printability on waterproof and color fade proof you can do outdoor also.